Teknamotor Skorpion 160 R/90

VPRAŠAJ ZA CENO
Videoposnetki Teknamotor -skorpion-160-r-90
OSNOVNE INFORMACIJE
Kategorija stroja / vozilaDrobilci lesa
Znamka /modelTeknamotor Skorpion 160 R/90
Leto registracije2018
Država
Poljska
Mascus ID4F3891F3
CENA
Cena brez DDVVprašaj za ceno
PODROBNOSTI
Popolna evidenca servisovDa
Transportna teža850 kg
Transportne dimenzije (DxŠxV)2320 x 1850 x 2320
mm
Tip motorjaHidrostatično
Dodatna opremaWeight 850 [kg]
Branch diameter 160 [mm]
No of knives 2 cutting + 2 counter-knife
Feeding speed up to 33 [running meters/min]
Chipping capacity up to 12 [stère meters/h]
Chip width from 9 to 11 [mm]
Feeding unit hydraulic feeder
Disk diameter 550 [mm]
Hopper dimensions (WxH) 285 x 165 [mm]
Type of drive tractor’s PTO
Min. power of tractor 80 [hp]

Equipment included:
-PTO shaft
-Independent hydraulic system
-Adjustment of height of ejecting the chips
-Rotary chimney 360°
-No-stress system

Additional accessories on request:
-Extension of the ejection tube
Drugi podatkiSkorpion 160 R/90 is designed for shredding tree limbs and trunks with a diameter of up to 160 mm.

Skorpion 160 R/90 is a disc model with a pneumatic blow-out system on the disc. Chips are ejected through the rotating chimney which can turn by 360 degrees in relation to the chassis. The cutting system consists of a disc with cutting knives sharpened on either side.

The chipper has a three-point suspension system and is designed to work with an above 80 hp farm tractor. Innovative solution of the lateral position of the inlet hopper enables simultaneous transport of chipper and trailer with a tractor.

The essential equipment of the chipper includes a hydraulic propulsion system servicing the feeding rollers driven by its own hydraulic pump. There is also a possibility of equipping the chipper with a unit for receiving the hydraulics from the tractor. Standard models also have a lever system of the hydraulic divider that can change the direction of the feeding rollers.

The chipper is also additionally equipped with an electronic system of work control, protecting the machine against excessive duty through temporary stopping the feeding.

Weight 850 [kg]
Branch diameter 160 [mm]
No of knives 2 cutting + 2 counter-knife
Feeding speed up to 33 [running meters/min]
Chipping capacity up to 12 [stère meters/h]
Chip width from 9 to 11 [mm]
Feeding unit hydraulic feeder
Disk diameter 550 [mm]
Hopper dimensions (WxH) 285 x 165 [mm]
Type of drive tractor’s PTO
Min. power of tractor 80 [hp]

Equipment included:
-PTO shaft
-Independent hydraulic system
-Adjustment of height of ejecting the chips
-Rotary chimney 360°
-No-stress system

Additional accessories on request:
-Extension of the ejection tube

http://www.teknamotor.co.uk

Teknamotor Sp. z o.o.

+48 ...POKAŽI
Prosimo vedno omenite prodajalcu, da ste oglas videli na portalu Mascusu.
Pošljite e-pošto

Prodajalec

  • TOMASZ SZCZEPANIAK

    Teknamotor Sp. z o.o.
    • +48 ...POKAŽI
      Prosimo vedno omenite prodajalcu, da ste oglas videli na portalu Mascusu.
    • +48 ...POKAŽI
      Prosimo vedno omenite prodajalcu, da ste oglas videli na portalu Mascusu.
    • +48 ...POKAŽI
      Prosimo vedno omenite prodajalcu, da ste oglas videli na portalu Mascusu.
    • Jeziki: nemščina, angleščina, španščina, francoščina, poljščina, ruščina, ukrajinščina
    • ul. Świętokrzyska 2a, 27-400 Ostrowiec Świętokrzyski, Poljska

Podjetje

TEKNAMOTOR SP. Z O.O.
8
LET AKTIVEN NA MASCUSU

Sorodne znamke

ZnamkaŠtevilo oglasov
John Deere1057
Timberjack481
Ponsse452
Valmet407
Caterpillar346
Na Mascus.si lahko najdete stroje znamke Teknamotor -skorpion-160-r-90 iz kategorije drobilci lesa. Cena tega Teknamotor -skorpion-160-r-90 stroja je -, registriran je bil leta 2018. Ta stroj se nahaja v - Poljska. Na Mascus.si lahko najdete številne druge stroje znamke Teknamotor -skorpion-160-r-90 ter seveda druge stroje iz kategorije drobilci lesa. Podrobnosti - Popolna evidenca servisov: Da, Transportna teža: 850 kg, Transportne dimenzije (DxŠxV): 2320 x 1850 x 2320 mm, Tip motorja: Hidrostatično