Liming MTW175 molino trapecio europeo bauma china 2014

Contact for Quotation： Whatsapp：008615838066400 Email：stonecrusher126.com All prices on this page are subject to change without prior notice Especificaciones de MTW 175 serie de molino trapecio europeo Cantidad de rodillos(pcs): 5 Tamaño máximo de alimentación(mm): menos de 40 mm Tamaño de final(mm): 1.6-0.045mm ,finera es 0.038mm Capacidad(T/H): 11-25 Dimensión(L*W*H)mm: 12095×10023×9916 Peso(T): 46 Motor de cuador principal: Y2-355M2-8/160kw/740rpm Motor de separador: YVP250M-6/37kw/980rpm Motor de ascensor: YX3-315L2-4/200kw/1480rpm Motor de elevadorr: TH315x10.5m/4kw/1480rpm Model de trituradora de mandíbula: PE250×750 con la potencia 22kw Alimentador: GZ4F/0.45kw Diámetro de interior de anillo (mm): Ф1750 Velocidad de rotación de los principales marcos (r/min):75

First, raw material should be crushed by the jaw crusher to the size specified, and then the crushed stuff is elevated into a hopper from which the stuff is loaded, through the vibrating feeder, evenly and continuously into the grinding chamber for power-processing. After this, the ground stuff is carried by the air into the separator for screening. The fine powder are blow into the cyclone collector and are poured out through the output-powder valve as the final products and the rough stuff after the screening will be recycled back into the grinding chamber for regrinding. The set's airflow system is closely sealed up and circulated under condition of negative pressure.