Sennebogen 683 TP

SENNEBOGEN / ThyssenKrupp Telescopic Piling Rig 683 TP Serial No.: 683.5.149 Year of manufacture: 2009 Operating hours: 2,325 (as of August 2026) With TP 1000 basic leader, with a total usable length of 38 m (extendable by 2 × 2.5 m). Total payload: 32 t Suitable for operation with diesel hammers, vibratory hammers or rotary drives with a maximum torque of 20–30 kNm. SENNEBOGEN 683 Base Carrier • Power package with 6-cylinder Deutz diesel engine TCD2013 L06, Tier 3, water-cooled, 186 kW @ 2,000 rpm • Hydraulically telescopic undercarriage T87/390 with B7 crawler tracks and hydraulic locking, crawler length 6,000 mm; reinforced tractive force • Two-section telescopic boom, approx. 10.8 m retracted and 18 m extended, hydraulically telescopic with mechanical locking • Crane winch 160 kN with special grooving (LEBUS system), 26 mm wire rope, low-maintenance design with rope pressure roller, including rope run-out protection for the final three rope turns • Electronic Load Moment Limiter (LMB) including load weight display and program • Air conditioning and heating system • Connection points at the rear for mounting a power pack or alternatively a separate winch • Rear support cylinder with bracket, bolt-on to the rear, with 800 mm stroke • Hydraulic lines for hammer operation (leakage oil) and drilling operation (supply/return), max. torque 20 kNm • Two small pump/return lines (NW10), quick-release coupling with counterpart for power-pack hydraulics, max. 250 bar Special Equipment • Maintenance-free B7 crawler tracks (58 links) with 900 mm triple-grouser track shoes, bevelled (standard: 700 mm) • Generator 230 V / 6–7 kW for operation of torque tools, lighting, electrical tools, etc. • 2 guide carriages for mounting a vibratory hammer (e.g. Müller MS-32 HFV), one of them swivelling • Bracket for mounting an external power pack (e.g. Müller MA-A 570 V) Technical Data – SENNEBOGEN 683 TP Base Carrier • Hydraulic oil filling: HLDP D46 • Transport weight without rear counterweight and without undercarriage counterweight: 57 t • Transport width: 3,500 mm • Rear counterweight: 25 t, consisting of: o Counterweight base plate 1: 5.4 t o Counterweight base plate 2: 5.2 t o 10 counterweight slabs × 1.5 t • Undercarriage counterweight: 2 × 6.5 t • Rear radius: approx. 5.15 m Leader Assembly – Type TP 1000 Basic leader, 38 m, consisting of: • 1 × leader head with pulling device • 5 × leader intermediate sections, each 5 m long, including connecting components • 0 × leader intermediate section, 2.5 m • 1 × leader base section, 10 m • 1 × leader foot, 1.5 m • 1 × leader foot plate, 0.5 m • 2 × 160 kN winches mounted on the leader • 1 × 60 kN winch mounted on the leader • Leader guide to the boom • Working platform for assembly / service lift • Wire ropes for maximum leader length • 2 × guide pulleys for the pile • Hydraulic hose package for the leader attachment